Jet Suck Combined

Jet Suck Combined


  • It can effectively clean sewer lines having a diameter up to 3″-7″.
  • The pressure exerted by the pump is 200 bar @ 13 lpm.
  • It can also be easily used in narrow lanes.


Combination of vacuum/jetting equipment is especially used for sewer systems’ cleaning and drain maintenance purposes. Equipment is mounted on a carrier vehicle in accordance with its technical specifications. By means of trusting and breaking effects of high pressured water, the blockage in canal is destroyed and all the remaining; dirty water, sludge, half-solid waste are collected by vacuum system.


  • Flushing: A high-pressure water hose with a sewer flushing nozzle is fed into the soiled sewer. The high-pressure water jet dislodges the dirt and flushes it to the gully hole. At the same time, the water jet pushes the hose further into the sewer.
  • Vacuuming: The material flushed into the gully hole is extracted by means of a vacuum system. Solids and water are thus conveyed by the suction hose into the sludge tank.
  • Combined sewer cleaning:If flushing and vacuuming work can be performed simultaneously, we talk of a combined cleaning/vacuuming vehicle.
  • Sewer cleaning with water recycling: Water and solids are separated in the sludge tank. The filtered water is reused for flushing purposes via the high-pressure water pump.



Tank Volume Between (4500 – 20.000) liters
Suction Boom System 270º rotating ( Diameter of 3” – 6”)
Vacuum Pump Capacity (300 – 5000) m³/h capacity
Vacuum Pump Drive Split Shaft PTO – Auxiliary Engine/ Direct Coupled
High Pressure Pump Between (130 -350) bar
High Pressure Pump Drive Split Shaft PTO – Auxiliary Engine
Hose Reel 90 º rotating – (3/4" – 3/2")
Jetting Reel With jetgun ( 20-60) meters long

Featured Clients